Pretty Lights After Party, Fluid510: speaker placement

Public v10, 2026-11-20. DJ on the bar (west) side, two stacks in front of the stage firing east, one dance zone. Interactive 3D: model.html. PDF: guide.pdf. Cabling plan: cabling-plan.pdf. All files.

TL;DR

Notes for the sound engineer

Plan and side view

Plan v10: DJ on the left (bar side), stacks fire east, one zone keep clear 5 ft ONE ZONE: dance floor about 230 sq ft STAGE / riser BAR TECH BOOTH house rack + amps (as is) DJ DJ stands rest of the venue (not ours) stack N stack S mix check spot our space: 25 x 20 ft. Stage, booth and DJ table sizes are estimates. Purple = NL4 runs; orange = DS210 aim + coverage edges. Side view, north stack: 2 IB218 + F315 + DS210 ear 5.6 ft ceiling about 21 ft (not checked), above this view stage 1 ft + DJ table IB218 IB218 F315 DS210 dance floor to the east (mid bar), DS210 centre 5.7 ft up

3D view

3D view

Speakers drawn as plain boxes at true outer size. Interactive: model.html.

Cable runs from the house rack

Rack in the tech booth (assumed). Route: out of the booth's south side, along the stage front edge behind the stacks (taped), into the back of each box. Needed = path + 2 m for drops and slack + 15%.

RunTypeNeededTakeNote
IB pair NNL43.7 m5 mhome run to the bottom IB, 4-core jumper to the one above
F315 NNL44.0 m5 m
DS210 NNL43.9 m5 mone NL4: mid on 1+/1-, HF on 2+/2-
IB pair SNL48.3 m10 mhome run to the bottom IB, 4-core jumper to the one above
F315 SNL48.5 m10 m
DS210 SNL48.4 m10 mone NL4: mid on 1+/1-, HF on 2+/2-
DJM-A9 Master 1 L/R -> WING Rack ch 1/2XLR x26.3 m10 mDJ feed (only the monitors come from the S32)
S32 -> booth monitors (K12.2)XLR x26.3 m10 mmonitors on the DJ table ends
AES-50 console to stage boxCat5e1-3 mshort patchboth in the booth

Total: 3x 5 m + 3x 10 m NL4 (+2 spare), 2x 2 m IB jumpers, 4x 10 m XLR. Each IB pair is 2 ohm on one amp channel; loss on 10 m of 4 mm2 about 0.4 dB.

Details